CAME ÖZAK 605 D is a professional double motorized electromechanical access gate designed to provide two wide controlled pedestrian passage lanes. Its configuration is suitable for wheelchair users, people with reduced mobility and other applications where additional passage width is required.
The system operates bi-directionally. Operating modes can be configured through the buttons and display on the control card: controlled entry and exit, controlled entry with free exit, free entry with controlled exit, or free entry and exit. Free-passage modes require optional photocells.
All functions, parameters and operating modes can be adjusted through the control card. All inputs are opto-coupler protected. The system is controllable by dry contact and compatible with all kinds of access control devices. Optional RS232, RS485 and TCP/IP modules are available.
In an emergency, the wings open in the preferred direction configured by DIP switch, providing free passage (fail-safe) and compatibility with fire warning and similar systems. During a power failure, free passage can be provided by manually pushing the wings towards the entry or exit direction. An optional fail-secure configuration can keep both entry and exit locked.
Technical specifications
- Application: indoors; outdoors with wing adaptation
- Operating temperature: –20°C to +68°C
- With optional heater: down to –50°C
- Relative humidity: up to 95%, non-condensing
- Operating intensity: 100%, 24/7
- Body material: AISI 304 stainless steel
- Optional body material: AISI 316L stainless steel
- Body finish: orbital brushed matt
- Optional finish: electrostatic powder coating on stainless steel
- Indoor wings: Ø33.7 × 1.5 mm AISI 304 stainless-steel pipe with acrylic infill
- Outdoor wings: Ø33.7 × 1.5 mm AISI 304 stainless-steel pipe
- Standard wing finish: satin brushed
- Optional wing finish: orbital brushed matt or electrostatic powder coating
- Side status/direction LED indicators: standard
- Top passage LED indicators: standard
- Operating voltage: 110/220 V AC, 50/60 Hz (±10%), 24 V DC
- Standby consumption: approx. 18 W
- Maximum consumption: approx. 44 + 44 W, depending on options and accessories
- Operation: bi-directional
- Operating system: electromechanical motorized
- Wing opening/closing time: approx. 1.5 seconds
- Control: dry contact
- Inputs: opto-coupler protected
- Access control compatibility: compatible with all kinds of access control devices
- Optional interfaces: RS232, RS485, TCP/IP
- Weight: approx. 59 kg
Optional features and accessories: wireless remote control (receiver-transmitter), manual control, counter with or without reset, card reader mounting bracket, heater, bottom plate, battery backup, AISI 316L stainless steel, RS232/RS485/TCP/IP modules, limiter, photocell for free mode and electrostatic powder coating on stainless steel.
