CAME ÖZAK BTG 300-D is a double full-height electromechanical security turnstile providing two independent controlled pedestrian lanes within a single structure. It is designed for high-security applications where physical access protection and increased pedestrian throughput are required.
The structure is built on main carriers and supported by side profiles and perforated sheet separators. It incorporates a waterproof and protected top lid with a damper for safety. The complete structure can be fully disassembled.
The turnstile incorporates a pair of three-section 120° rotors, each featuring 11 + 11 individually removable arms.
BTG 300-D is available in three material configurations:
- BTG 300 D: body and Ø42 × 2.5 mm arms – electrostatic powder coating on hot-dip galvanized steel; perforated sheet separators – AISI 304 stainless steel.
- BTG 300 D-25: body – electrostatic powder coating on hot-dip galvanized steel; Ø40 × 2.0 mm arms and perforated separators – AISI 304 stainless steel.
- BTG 300 D-100: body, Ø40 × 2.0 mm arms and perforated separators – AISI 304 stainless steel.
The system operates bi-directionally. All functions, parameters and operating modes can be adjusted through the buttons and screen on the control card. All inputs are opto-coupler protected. Control is provided by dry contact, and the system is compatible with all kinds of access control devices.
Technical specifications
- Application: indoor and outdoor
- Operating temperature: –20°C to +68°C
- With optional heater: down to –50°C
- Relative humidity: up to 95%, non-condensing
- Operating intensity: 100%, 24/7
- Structure: main carriers with side profiles and perforated sheet separators
- Top lid: waterproof and protected, with safety damper
- Structure: completely disassemblable
- Rotors: 2 × 3 sections / 120°
- Arms: 11 + 11 individually removable arms on each rotor
- Perforated sheet separators: AISI 304 stainless steel
- Status/direction indicators: LED, standard
- LED passageway illumination: standard
- Operating voltage: 110/220 V AC, 50/60 Hz (±10%), 24 V DC
- Standby consumption: approx. 16.2 W
- Consumption during passage: approx. 7.6 + 7.6 W
- Operation: bi-directional
- Standard operating system: electromechanical manual
- Optional operating system: electromechanical motorized
- Maximum manual passage capacity: 96 cycles/min
- Nominal manual flow rate: approx. 50 persons/min
- Maximum motorized passage capacity: 80 cycles/min
- Nominal motorized flow rate: approx. 40 persons/min
- Control: dry contact
- Inputs: opto-coupler protected
- Optional interfaces: RS232, RS485, TCP/IP
- Weight: approx. 375 kg
Operating modes: controlled entry and exit; controlled entry with free exit; free entry with controlled exit; single input for both directions; free entry and exit.
Emergency mode: the system provides free passage in both directions (fail-safe) and is compatible with fire alarm and similar systems. Normal operating mode is restored after the emergency condition ends.
Power-off situation: free passage in both directions is provided as standard. Optional fail-secure configurations include entry and exit locked, entry free/exit locked, or entry locked/exit free. With the fail-secure option, the selected direction can be released using a manual override key.
Optional features and accessories: motor-driven unit, wireless remote control (receiver-transmitter), manual control, manual override key with fail-secure option, counter with or without reset, card-reader mounting bracket, passage completion sensor, contactless passage sensor for motorized models, heater, bottom plate (standard or for forklift handling), battery backup, RS232/RS485/TCP/IP modules, limiter and different colour choices.
