CAME ÖZAK BT 312-D is a professional double full-height electromechanical turnstile providing two controlled pedestrian lanes within a single structure. It is designed for sites requiring a high level of physical security combined with increased pedestrian throughput.
The structure is built on main carriers and supported by pipe beams on the sides. It incorporates a waterproof protective top lid, mechanical-compartment side panels and a completely closed ceiling. The complete structure can be disassembled when required.
The system incorporates a pair of three-section 120° rotors. With the standard 2000 mm clear passage height, the rotors have 10 + 10 individually removable arms. With the optional 2120 mm clear passage height, 11 + 11 arms are used.
Optionally, the structure can comply with the UK H&S requirement for a ≤98 mm gap between upright profiles.
Material configurations
- BT 312 D: body and Ø42 × 2.5 mm arms – electrostatic powder coating on hot-dip galvanized steel.
- BT 312 D-25: body – electrostatic powder coating on hot-dip galvanized steel; Ø40 × 2.0 mm arms – AISI 304 stainless steel, optionally AISI 316L.
- BT 312 D-100: body and Ø40 × 2.0 mm arms – AISI 304 stainless steel, optionally AISI 316L.
- Standard stainless-steel arm finish: satin brushed.
- Optional finish: electrostatic powder coating on stainless steel.
Technical specifications
- Application: indoor and outdoor
- Operating temperature: –20°C to +68°C
- With optional heater: down to –50°C
- Relative humidity: up to 95%, non-condensing
- Operating intensity: 100%, 24/7
- Rotors: 2 × 3 sections / 120°
- Standard configuration: 10 + 10 individually removable arms
- Optional 2120 mm configuration: 11 + 11 arms
- Standard clear passage height: 2000 mm
- Optional clear passage height: 2120 mm
- Status/direction indicators: LED, standard
- LED passageway illumination: standard
- Operating voltage: 110/220 V AC, 50/60 Hz (±10%), 24 V DC
- Standby consumption: approx. 16.2 W
- Consumption during passage: approx. 7.6 + 7.6 W
- Operation: bi-directional
- Standard operating system: electromechanical manual
- Optional operating system: electromechanical motorized
- Maximum manual passage capacity: 96 cycles/min
- Nominal manual flow rate: approx. 50 persons/min
- Maximum motorized passage capacity: 80 cycles/min
- Nominal motorized flow rate: approx. 40 persons/min
- Control: dry contact
- Inputs: opto-coupler protected
- Compatible with all kinds of access control devices
- Optional interfaces: RS232, RS485, TCP/IP
- Weight: approx. 530 kg
Operating modes: controlled entry and exit; controlled entry with free exit; free entry with controlled exit; single input for both directions; free entry and exit.
Emergency mode: free passage is provided in both directions (fail-safe). The system is compatible with fire warning and similar systems. At the end of an emergency situation, the system returns to its normal operating mode.
Power-off situation: free passage in both directions is provided as standard. Optional fail-secure configurations include entry and exit locked, entry free/exit locked, or entry locked/exit free. With the fail-secure option, free passage in the selected direction can be enabled using a manual override key.
Optional features and accessories: motor-driven unit, wireless remote control (receiver-transmitter), manual control, manual override key with fail-secure option, counter with or without reset, card-reader mounting bracket, passage completion sensor, contactless passage sensor for motorized models, heater, canopy, bottom plate (standard or for forklift handling), battery backup, AISI 316L stainless steel, RS232/RS485/TCP/IP modules, limiter, 2120 mm clear passage height, mechanical-compartment accessibility from the ceiling, different colour choices and compliance with the UK H&S requirement for a ≤98 mm gap between upright profiles.
