CAME ÖZAK BTX 300-D N1 is a professional double full-height electromechanical turnstile designed for high-security access control applications. Two controlled pedestrian lanes within one structure provide increased throughput and allow efficient management of entry and exit traffic.
The structure is built on main carriers and supported by pipe beams on the sides. It incorporates a waterproof and protected top lid with a damper for safety. The complete structure can be fully disassembled when required.
The system incorporates a pair of three-section 120° rotors, featuring 10 + 10 individually removable arms at the standard 2000 mm clear passage height. With the optional 2120 mm clear passage height, 11 + 11 arms are used.
The structure complies with the UK Health & Safety requirement for a ≤98 mm gap between upright profiles.
Material configurations
- BTX 300 N1 D: body and Ø42 × 2.5 mm arms – electrostatic powder coating on hot-dip galvanized steel.
- BTX 300 N1 D-25: body – electrostatic powder coating on hot-dip galvanized steel; Ø40 × 2.0 mm arms – AISI 304 stainless steel, optionally AISI 316L.
- BTX 300 N1 D-100: body and Ø40 × 2.0 mm arms – AISI 304 stainless steel, optionally AISI 316L.
- Standard stainless-steel arm finish: satin brushed.
- Optional finish: electrostatic powder coating on stainless steel.
Technical specifications
- Application: indoor and outdoor
- Operating temperature: –20°C to +68°C
- With optional heater: down to –50°C
- Relative humidity: up to 95%, non-condensing
- Operating intensity: 100%, 24/7
- Structure: main carriers supported by side pipe beams
- Top lid: waterproof and protected, with safety damper
- Structure: completely disassemblable
- Rotors: 2 × 3 sections / 120°
- Arms: 10 + 10 individually removable arms
- Optional 2120 mm version: 11 + 11 arms
- Standard clear passage height: 2000 mm
- Optional clear passage height: 2120 mm
- Gap between upright profiles: ≤98 mm, UK H&S compliant
- Status/direction indicators: LED, standard
- LED passageway illumination: standard
- Operating voltage: 110/220 V AC, 50/60 Hz (±10%), 24 V DC
- Standby consumption: approx. 16.2 W
- Consumption during passage: approx. 7.6 + 7.6 W
- Operation: bi-directional
- Standard operating system: electromechanical manual
- Optional operating system: electromechanical motorized
- Maximum manual passage capacity: 96 cycles/min
- Nominal manual flow rate: approx. 50 persons/min
- Maximum motorized passage capacity: 80 cycles/min
- Nominal motorized flow rate: approx. 40 persons/min
- Control: dry contact
- Inputs: opto-coupler protected
- Compatible with all kinds of access control devices
- Optional interfaces: RS232, RS485, TCP/IP
- Weight: approx. 365 kg
Operating modes: controlled entry and exit; controlled entry with free exit; free entry with controlled exit; single input for both directions; free entry and exit.
Emergency mode: the system allows free passage in both directions (fail-safe) and is compatible with fire warning and similar systems. At the end of an emergency situation, the system returns to its normal operating mode.
Power-off situation: free passage in both directions is provided as standard. Optional fail-secure configurations include entry and exit locked, entry free/exit locked, or entry locked/exit free. With the fail-secure option, free passage in the selected direction can be enabled using a manual override key.
Optional features and accessories: motor-driven unit, wireless remote control (receiver-transmitter), manual control, manual override key with fail-secure option, counter with or without reset, card-reader mounting bracket, passage completion sensor, contactless passage sensor for motorized models, heater, canopy, bottom plate (standard or for forklift handling), battery backup, AISI 316L stainless steel, RS232/RS485/TCP/IP modules, limiter, 2120 mm clear passage height, mechanical-compartment accessibility from the ceiling and different colour choices.
